Peerless-AV WL-SR560M-200 - Installation User Manual
Page 16
16 of 19
ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12
Locate the IR receiver inside of the wireless receiver enclosure shown in fi gure 19.1. Remove the tie from the cable
and position the IR receiver on the display within line of sight of your remote as shown in fi gure 19.2. Remove the
adhesive backing from the IR receiver eye and attach to the display. Coil up the excess cord near the wireless
receiver enclosure (AA) and secure with a cable tie (HH). Store the coiled cord back inside of the enclosure.
19
IR RECIEVER
IR RECIEVER
fi g. 19.1
fi g. 19.2
Close the top cover of the wireless receiver assembly (AA), making sure that the power adapter cords run
underneath the cable opening as shown below. Re-install the two #8 screws.
20
CABLE OPENING
#8 SCREWS