Warning – Peerless-AV DST965 - Installation User Manual
Page 10
10 of 11
ISSUED: 10-24-11 SHEET #: 125-9260-2 2-1-13
D
M
Mounting and Removing Flat Panel Screen
Hook adapter brackets (
D) onto adapter plate (M), then slowly swing screen in as shown. Turn safety/security
screws clockwise at least six times to prevent screen from being removed as shown in detail 5.
Tighten using wrench (
X).
Screen can be adjusted horizontally if desired as shown in figure 9.1.
NOTE: To lock the screen down, tighten safety/security screws to adapter bracket as shown in detail 5.
To remove screen from mount, loosen safety/security screws, swing screen away from mount, and lift screen off of
mount.
9
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
WARNING
Fig. 9.1
DETAIL 5
SAFETY/SECURITY
SCREWS
D
M