AEG HK654070FB - Manual (Page 21)

Sensor field Function
8 Heat setting display To show the heat setting.
9 Control bar To set a heat setting.
10 / To increase or decrease the time.
11
To set a cooking zone.
12 To activate and deactivate the outer
rings.
3.2 Heat setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
The function operates.
The Automatic Heat Up function operates.
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator) : con-
tinue cook / stay warm / residual heat.
Lock / The Child Safety Device operates.
The Automatic Switch Off function operates.
3.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / The risk of burns
from residual heat!
OptiHeat Control shows the level of the
residual heat.
4. DAILY USE
4.1 Activation and
deactivation
Touch for 1 second to activate or de-
activate the appliance.
4.2 Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sound some time and
the appliance deactivates. Remove the
object or clean the control panel.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
comes on and the appliance
deactivates. See below.
• The relation between heat setting and
times of the Automatic Switch Off
function:
•
, - — 6 hours
ENGLISH
21