KIA Sorento 2006 - Manual (Page 241)

If the 120A “MAIN” fuse is blown, it
must be removed as follows:
1. Disconnect the negative battery
cable.
2. Remove the bolts in the photo
above.
3. Replace the fuse with a new one of
the same 120A rating.
4. Reinstall in the reverse order of
removal.
IN CASE OF AN EMERGENCY
6-9
3500 DOHC24V
S2BLC701
Fuse Box
S2BLA606A
✽ ✽ NOTICE
After checking the fuse box in the
engine compartment,
securely
install the fuse box cover. If not,
electrical failures may occur from
water leaking in.
BL-ENG (CAN)-6.qxd 7/28/05 5:57 PM Page 9