KIA Sorento 2006 User Manual

Page 251

Advertising
background image

IF YOU HAVE A FLAT TIRE

Storing the Jack and Tools

Jack is stored in the compartment of
the cargo area.
Jack handle and wheel lug nut
wrench are located in the cargo area
floor.

Removing the Spare Tire

Your spare tire is stored underneath
your vehicle, directly below the cargo
area.
1. Assemble the wheel lug nut

wrench to the jack handle.

2. Open the rear hatch.

3. Insert the jack handle into the hole

just above the rear bumper. The
resistance to turning will be felt
when properly engaged.

4. Turn the jack handle counter-clock-

wise until the spare tire reaches
the ground. Turn the jack handle
10~13 revolutions counter-clock-
wise more after the spare tire
reaches the ground, and draw the
spare tire towards rear of vehicle.
Never rotate the jack handle more
than 17 revolutions, otherwise the
spare tire carrier may be damaged.

IN CASE OF AN EMERGENCY

6-19

S2BLA614C

S2BLA628

S2BLA615C

WARNING

Hold the handle firmly and turn
it slowly to lower the spare tire.
The separation of the wrench
from the handle could cause
loss the control and personal
injury.

BL-ENG (CAN)-6.qxd 7/28/05 5:57 PM Page 19

Advertising