KIA Sportage 2010 User Manual

Page 196

Advertising
background image

4 49

Driving your vehicle

Non-operational conditions of
rear parking assist system

The rear parking assist system
may not operate properly when:
1. Moisture is frozen to the sensor. (It

will operate normally when the
moisture has been cleared.)

2. The sensor is covered with foreign

matter, such as snow or water, or
the sensor cover is blocked. (It will
operate normally when the mater-
ial is removed or the sensor is no
longer blocked.)

3. Driving on uneven road surfaces

(unpaved roads, gravel, bumps,
gradient).

4. Objects generating excessive

noise (vehicle horns, loud motor-
cycle engines, or truck air brakes)
are within range of the sensor.

5. Heavy rain or water spray exists.
6. Wireless transmitters or mobile

phones are within range of the
sensor.

7. The sensor is covered with snow.
8. Trailer towing

The detecting range may decrease
when:
1. The sensor is stained with foreign

matter such as snow or water.
(The sensing range will return to
normal when removed.)

2. Outside air temperature is

extremely hot or cold.

The following objects may not be
recognized by the sensor:
1. Sharp or slim objects such as

ropes, chains or small poles.

2. Objects which tend to absorb the

sensor frequency such as clothes,
spongy material or snow.

3. Undetectable objects smaller than

1 m (40 in.) in height and narrower
than 14 cm (6 in.) in diameter.

Rear parking assist system
precautions

• The rear parking assist system

may not sound sequentially
depending on the speed and
shapes of the objects detected.

• The rear parking assist system

may malfunction if the vehicle
bumper height or sensor installa-
tion has been modified or dam-
aged. Any non-factory installed
equipment or accessories may
also interfere with the sensor per-
formance.

• The sensor may not recognize

objects less than 40 cm (15 in.)
from the sensor, or it may sense an
incorrect distance. Use caution.

• When the sensor is frozen or

stained with snow, dirt, or water,
the sensor may be inoperative until
the stains are removed using a soft
cloth.

• Do not push, scratch or strike the

sensor. Sensor damage could
occur.

1

2

3

4

5

6

7

8

9

Advertising