KIA Rio_Rio5 2010 - Manual (Page 45)

Knowing your vehicle
36 3
4. Position the lap portion (1) of the belt
across your lap as LOW ON THE HIPS
as possible to reduce the risk of sliding
under it during an accident. Adjust the
belt to a SNUG FIT by pulling up on
the shoulder portion (2) of the safety
belt. The belt retractor is designed to
take up excess webbing automatically
and to maintain tension on the belt. For
your safety do not put any excess
slack into the safety belt.
To unfasten:
Press the release button on the buckle
and allow the belt to slowly retract.
✽ ✽
NOTICE
When returning the rear seatbacks to
the upright position, remember to
return the rear shoulder belts to their
proper position. Routing the safety belt
webbing through the rear safety belt
guides will help keep the belts from
being trapped behind or under the seats.
4GQB0338 1JBH2264 1JBA3115
4 Door
CAUTION
When using the seat belt, use it
after taking it out of the guides. If
you pull the seat belt when it is
stored in the guides, it may damage
the guides and/or belt webbing.