Knowing your vehicle – KIA Rio_Rio5 2010 User Manual

Page 46

Advertising
background image

3 37

Knowing your vehicle

3 Point rear center belt
(if equipped)

To fasten the rear center belt

1. Insert the tongue plate (A) into the

open end of the anchor connector (B)
until an audible “click" is heard, indi-
cating the latch is locked. Make sure
the belt is not twisted.

2. Pull the tongue plate (C) and insert the

tongue plate (C) into the open end of
the buckle (D) until an audible “click” is
heard, indicating the latch is locked.
Make sure the belt is not twisted.

There will be an audible “click” when the
tab locks in the buckle. The seat belt
automatically adjusts to the proper length
only after the lap belt is adjusted manu-
ally so that it fits snugly around your hips,
if you lean forward in a slow, easy
motion, the belt will extend and let you
move around. If there is a sudden stop or
impact, the belt will lock into position. It
will also lock if you try to lean forward too
quickly.

1JBA3048

WARNING

When using the rear seat center
belt, you must lock all tongue plates
and buckle/anchor connector. If any
tongue plate or buckle/anchor con-
nector is not locked, it will increase
the chance of injury or death in the
event of collision.

1JBA3049

Advertising