KIA Cadenza 2014 - Manual (Page 112)

Features of your vehicle
44 4
Retain the original transmitter of the
RF device you are programming for
use in other vehicles as well as for
future HomeLink
® programming. It is
also suggested that upon the sale of
the vehicle, the programmed
HomeLink
® buttons be erased for
security purposes.
Programming HomeLink ®
✽ ✽
NOTICE
• When programming a garage
door opener, it is advised to park
the vehicle outside of the garage.
• It is recommended that a new bat-
tery be placed in the hand-held
transmitter of the device being pro-
grammed to HomeLink
® for quick-
er training and accurate transaxle
of the radio-frequency signal.
• Some vehicles may require the
ignition switch to be turned to the
second (or "accessories") position
for programming and/or opera-
tion of HomeLink
® .
• In the event that there are still pro-
gramming difficulties or questions
after following the programming
steps listed below, contact
HomeLink
® at: www.homelink.com
or 1-800-355-3515.
CAUTION
Before programming HomeLink ®
to a garage door opener or gate
operator, make sure that people
and objects are out of the way of
the device to prevent potential
harm or damage. Do not use
HomeLink
® with any garage door
opener that lacks the safety stop
and reverse features required by
U.S. federal safety standards
(this includes any garage door
opener model manufactured
before April 1, 1982). A garage
door that cannot detect an object
- signaling the door to stop and
reverse - does not meet current
U.S. federal safety standards.
Using a garage door opener with-
out these features increases the
risk of serious injury or death.