Features of your vehicle – KIA Cadenza 2014 User Manual

Page 115

Advertising
background image

4 47

Features of your vehicle

Operating HomeLink

®

To operate, simply press and release
the programmed HomeLink

®

button.

Activation will now occur for the
trained device (i.e. garage door
opener, gate operator, security sys-
tem, entry door lock, home/office
lighting, etc.). For convenience, the
hand-held transmitter of the device
may also be used at any time.

Reprogramming a single
HomeLink

®

button

To program a new device to a previ-
ously trained HomeLink

®

button, fol-

low these steps:
1. Press and hold the desired

HomeLink

®

button. Do NOT release

until step 4 has been completed.

2. When the indicator light begins to

flash slowly (after 20 seconds),
position the handheld transmitter 1
to 3 inches away from the
HomeLink

®

surface.

3. Press and hold the handheld

transmitter button. The HomeLink

®

indicator light will flash, first slowly
and then rapidly.

4. When the indicator light begins to

flash rapidly, release both buttons.

5. Press and hold the just-trained

HomeLink

®

button and observe

the red Status Indicator LED. If the
indicator light stays on constantly,
programming is complete and
your new device should activate.

Erasing HomeLink

®

buttons

Individual buttons cannot be erased.
However, to erase all three pro-
grammed buttons:
1. Press and hold the two outer

HomeLink

®

buttons until the indi-

cator light begins to flash-after 20
seconds.

2. Release both buttons. Do not hold

for longer than 30 seconds.

The Integrated HomeLink

®

Wireless

Control System is now in the training
(learn) mode and can be pro-
grammed at any time following the
appropriate steps in the Programming
sections above.

Advertising