Newport Brass 75-13 Double Garment Hook - Manual

Installation Instructions
Double Garment Hook
Model No. 75-13
Recommended Installation by a Professional Contractor
1. Drill hole in wall at desired location using the appropriate drill size:
· Wood Screw (#6 x 2”) - use: 3/32" Drill
· Toggle Screw (6-32 x 3”) - use: 3/8" Drill
2. Fasten BASE (1) to wall using either WOOD/TOGGLE SCREWS (2). (See Fig. 1)
3. Place POST (3) into BASE (1) at the appropriate height specified and secure into place with set
SCREW(4). (See fig.2)
4. Place ESCUTCHEON (5) over BASE (1). Attach DOUBLE HOOK POST (6) over ESCUTCHCEON
(5). Secure into place by tightening the SETSCREW (7). (See Fig. 3)
Fig. 1
2
1
5
6
1
7
Fig. 2
Fig. 3
1
3
4 2”
(949)417-5207
NWP-75-13 Santa Ana CA 92705 12/5/2011
www.brasstech.com