Newport Brass 9208 Astor - Manual (Page 2)

NWP-9208
Recommended Installation by a Professional Plumbing Contractor
Note:The use of petroleum base plumbers putty on our products will nullify the war-
ranty.We recommend the use of clear silicone sealing materials. Recommended
deck thru hole Ø 1.38"
1. Place the spout hoses, one at a time, and mounting rod through mounting surface.
Secure spout into place with mounting bracket and nut. See Fig. 1
2. Attach hot/cold spout supply hoses to appropriate supply lines and valves in the
wall. Spout supply hose ends ½" NPT. See Fig. 2
3. Remove aerator from spout, using blue key supplied.Turn on water supply, and flush
system until water is clear. Check for leaks and make any final adjustments required.
Re-attach aerator to the spout.