Prokit's Industries MT-7057 - Manual (Page 12)

11
RJ-11 cables may have 2 connections, 4
connections, or as many as 6 connections. For 2
connection cables, LED 3 and 4 must light .For 4
connection cables, LED 2,3,4, and 5 must light.
For6 connection cables, LED 1, 2,3,4,5, and 6
must light. The numbered LEDs DO NOT indicate
that a GOOD connection exists, only that a
connection exists. If the Short or Cross LEDs are
lit, there is a fault in the cable.
6.5 Connected LED/3 Beepers/Short LED/
Numbered LEDs
If the connected LED light, the Beeper emits
3 beeps, and the Short LED lights, the cable
has a fault. The Numbered LEDs indicate the
location of a short.
Note:
In the Short mode, the Numbered LEDs only
indicate the location of the shorts. The other
connections in the cable are not indicated. If
more than 3 numbered LEDs light, there may be
multiple shorts in the cable.
6.6 Connected LED/2 Beepers/Cross LED /
Numbered LEDs
If the Connected LED lights, the Beeper emit
2 beeps, and the Cross LED lights, the cable
has a fault.
Notes:
In the Cross-mode, the Numbered LEDs indicate