R&M Materials Handling VARIABLE SPEED CONTROLS ControlMaster Select Service Manual - Manual (Page 16)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
16/46
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
4.1.2 Control unit (CSS)
Control unit (CSS) includes a control board with five board slots for option boards and a control keypad
for parameter adjustments. Inverter uses only one of the existing slots and is used to connect I/O
extension board. The CSS is connected to PSS through a connector.
Green Red Status
ON OFF Everything is OK.
blinking ON Fault
blinking blinking In process of software downloading
RED
GREEN
K
E
Y
P
A
D
I/O
E
xt
en
si
on
B
oa
rd
ANALOG TERMINAL
ROA1
A B C D
ANALOG TERMINAL
4.1.3 I/O Extension board
NXOPTB9 / I/O Extension board ID: 52305691
Terminal Signal name Description
1 DID1 42-240Vac 50/60Hz
2 DID2 42-240Vac 50/60Hz
3 DID3 42-240Vac 50/60Hz
4 DID4 42-240Vac 50/60Hz
5 DID5 42-240Vac 50/60Hz
6 COM Common for DID1-DID5
7
ROD1
8 ROD1
Relay output, 250V 8A, normal open
For brake contactor control
LED Blinking Status
Yellow 0.25Hz OK
Yellow 4Hz
Board internal fault or communication fault with control
unit
YELLOW
1 2 3 4 5 6 7 8
4.2 Control voltage transformer
Power of control voltage transformer has to be n * 50VA + 50VA (min. 250VA), n = number of inverters.
This power does not have to be added to otherwise needed transformer power.