ZMODO ZMD-DT-SFN6 16CH H.264 Smart Security 960H DVR - Manual (Page 16)

16
3.8.3 8 Sensor setup
In "system setup" menu, choose "PTZ setup" to enter its setting interface.
Channel: chose the target channel by clicking select box.
Work mode: select disable or able to stop the alarm or start the alarm.
Alarm duration: set up alarm duration time.
Recording channel: select the target channel to make recording after alarm is triggered.
Alarm: “☑” enable alarm, “
□” close alarm.
Buzzer: “☑”start buzzer, “ □” close buzzer.
Copy to: select the channel and click "copy to" & ''ok " to copy
the same setting to other channel. Or user can choose copy to "all" to make all channel in same stetting.
Click button "cancel", the setup information will be non-saved but exit.
3.8.4 System tool
In main menu, choose "system tool" and enter its setting interface. It includes four setting: user
management, HDD management, system maintenance and factory setting.