ZMODO ZMD-DT-SFN6 16CH H.264 Smart Security 960H DVR - Manual (Page 21)

21
IP address: Default 192.168.1.114(User input correct IP according IP actual situation, if in 1 network
segment, input 192.168.1.114,if in 0 network segment, input 192.168.0.114 ).If no IP conflict, do not
need to change 114 to other IP
Subnet mask: In order to distinguish subnet segment, default 255.255.255.0
Default gateway: Default 192.168.1.1(Change according to actual situation) In router running status can
see gateway
DNS address: Default 192.168.1.1, change your network segment DNS. Enter router can check DNS
address
After input all info, click to save, then to preview interface, then enter network setting to see ID
4. For remote view in computer, go to
www.dvrskype.com
Do the following setup before you log in Esee on computer.
IE setting, if use it for the first time, the software can't load, then need to make the following setting,
Internet options-> safety-Internet-> custom options-> pick Active X and plugin all for opening, click ok.
5. Go to
www.dvrskype.com , input Esee ID, user name and password, this user name and password
is same with DVR user name and password
Note: Default user name: admin Default password: 111111.