Powersolve Short Form Catalogue - Manual (Page 14)

DELTA ELEKTRONIKA
DC POWER SUPPLIES
24
For full specifications and order information please visit www.deltapowersupplies.com
analog Series
analog interFaCeS
Specifications
•
Programming and monitoring offset : +/- 60 µV typical
•
Full scale error : 0.1% calibrated
•
Non-linearity : 0.01% typical, TC = - 65ppm/°C
•
Common mode rejection : 80 dB @ 50 Hz
Features
•
Selectable 0-5 V and 0-10 V signal levels
•
Isolated programming and monitoring of U, I and status signals
•
Prevents problems with earth loops and CM-voltages
•
Factory installed or external module
•
Reinforced safety insulation 1000 VDC*
* External module has Basic insulation only
Unit
ISO AMP Isolated Analog Programming
Specifications
•
Programming and monitoring offset : +/- 60 µV typical
•
Full scale error : 0.1% calibrated
•
Non-linearity : 0.01% typical, TC = - 65ppm/°C
•
Common mode rejection : 80 dB @ 50 Hz
Features
•
Connecting SM3000 and ES-series in M/S series mode
•
Equal voltage sharing in series operation
•
Series operation possible up to 600 V
Unit
M / S - ADAPTER Master / Slave Series Adapter
Specifications
•
Undervoltage range : 18-48 V
•
Overvoltage range : 24-64 V
•
Insulation between circuits : 500 V DC
•
Alarm contact : 100 mA / 30 V, Normally Closed
Features
•
Large adjustment for use on both 24 V and 48 V
•
Two isolated comparator circuits with alarm contact and LED indication
•
Monitors output voltage of 2 power supplies
Unit
AL 24-48 Under and Over Voltage Alarm