Zanussi ZWG7120K - Manual (Page 26)

Temperature button (Temp.)
Press this button to change the default temper-
ature.
Symbol
— cold water.
Spin button (Centrigugeren/ Essorage)
With this button you can decrease the spin
speed.
The indicator of the set speed comes on.
Rinse Hold button (Spoelstop/ Anti-
froissage)
Set this function to prevent the laundry creases.
There is a water in the drum when the pro-
gramme is completed.
Super quick button (Supersnel/ Rapide)
Press this button to decrease the programme
duration.
Set this function for items with light soil or
items to refresh.
Extra rinse button (Extra spoelen/
Rinçage plus)
Press this button to add rinsing phases to a
programme.
Use this function for persons allergic to deter-
gents and in areas where the water is soft.
Delay start button (Startuitstel/Départ
différé)
Press this button to delay the start of a pro-
gramme from 30 minutes to 20 hours.
Permanent extra rinse function
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate this function press the button
“Spoelstop/ Anti-froissage” and the button
“Extra spoelen/ Rinçage plus” at the same
time. The indicator of the button “Extra spoe-
len/ Rinçage plus” comes on.
• To deactivate this function press the same
buttons again until the indicator of the button
“Extra spoelen/ Rinçage plus” goes off.
Child lock function
This function prevents the children to play with
the control panel.
• To activate the function, press the button
“Temp.” and the button “Centrigugeren/ Es-
sorage” at the same time until the display
shows the symbol
.
• To deactivate the function, press the same
buttons until the symbol goes off.
You can activate the function:
• Before you press the Start/Pauze Départ/
Pause button: the appliance cannot start.
• After you press the Start/Pauze Départ/
Pause button, all the buttons and the pro-
gramme knob do not operate.
Acoustic signals function
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals,
press the button “Spoelstop/ Anti-froissage”
and the button “Supersnel/ Rapide” at the
same time for 6 seconds.
If you deactivate the acoustic signals, they
continue operate when the appliance has
a malfunction.
Before first use
Put a small quantity of detergent in the main
wash compartment of the detergent dispenser.
Set and start a programme for cotton at the highest temperature without laundry. This re-
moves all possible dirt from the drum and the
tub.
Daily use
1. Open the water tap.
2. Connect the mains plug to the mains sock-
et.
3. Put the laundry in the appliance.
4. Use the correct quantity of detergent and
additives.
26
www.zanussi.com