Zanussi ZWG7120K - Manual (Page 28)

A
When the flap is in
position B and you
want to use powder
detergent:
1. Remove the
drawer.
2. Adjust the flap in
position A.
3. Put back the
drawer in the re-
cess.
• Measure out the detergent and the fabric
conditioner.
• Put the detergent and the fabric condition-
er into the compartments.
• Carefully close the detergent drawer.
Setting a programme
1. Turn the programme knob and set the pro-
gramme:
– The indicator of Start button flashes.
– The display shows the programme dura-
tion.
2. If necessary, change the temperature and
the spin speed or add available functions.
When you press the relevant button, the in-
dicator of the set function comes on.
Starting a programme without the delay
start
Press the Start button:
• The indicator of button Start stops to flash.
The indicator of the locked door is on.
• The programme starts and the door locks.
• The programme time decreases with steps of
one minute.
Starting a programme with the delay start
• Press the “Startuitstel/Départ différé” button
again and again until the display shows the
delay you want to set. The related symbol
comes on.
• Press the Start/Pauze Départ/Pause button:
The appliance starts the countdown.
When the countdown is completed, the pro-
gramme starts automatically.
You can change or cancel the delay start
before you press the Start button. After
pressing the Start button you can only cancel
the delay.
To cancel the delay start:
1. Press the Start/Pauze Départ/Pause but-
ton to set the appliance to PAUSE.
2. Press the “Startuitstel/Départ différé” but-
ton. The display shows ’.
3. Press the Start/Pauze Départ/Pause but-
ton again to start the programme immedi-
ately.
Interruption of a programme
1. Press the button Start/Pauze Départ/
Pause. The indicator flashes.
2. Press the button Start/Pauze Départ/
Pause again. The washing programme
continues.
Cancel a programme
1. Turn the programme knob to to cancel
the programme and to deactivate the appli-
ance.
2. Turn the programme knob again to activate
the appliance. Now, you can set a new
washing programme.
The appliance does not drain the water.
Changing the options
You can change only some options before they
operate.
1. Press the button Start/Pauze Départ/
Pause. The indicator flashes.
2. Change the options.
3. Press the button Start/Pauze Départ/
Pause again. The programme continues.
Open the door
While a programme or the delay start operates,
the appliance door is locked. The indicator
is on.
Caution! If the temperature and level of
the water in the drum are too high, you
cannot open the door.
28
www.zanussi.com