Swanstone SBF-3464 - Installation - Manual (Page 15)

16. Install caulking nut (6), slotted side up, by threading
it into the drain body.
17. Insert wrench (8) into the slots in the caulking nut.
Tighten the nut by using a large flat-bladed
screwdriver inserted in the center slot of the wrench.
Do not overtighten the nut.
18. Snap round strainer cover (7) onto the drain.
Finally, install the trench drain cover.
The shower floor installation is now complete.
DO NOT discard these installation instructions.
PLEASE LEAVE THEM WITH THE
HOMEOWNER.
ADA-016D
7
ADA-016C
8
ADA-016B
6
800-325-7008 15 The Swan Corporation – Swanstone
Installation Procedure