Series, 160s, 160sl – dbx 160SL User Manual

Page 16

Advertising

160S

lue

series

160S

controls

160S

notes

160S

Operations

160S

Operations

Inspection

Operating

Connection

Installation

Technical

Introduction

to your system

considerations

contents

concept

diagram

applications

support and factory service

160S

Specifications

160S

Manual

Design

Block

Controls

Advanced

Warranty

lue

series

Note that the gain reduction scale is linear in dB as opposed to the standard VU markings on the upper

scale on which input and output levels are monitored. This allows for easy visual indication of gain
reduction, as it can be read in a fraction of a second, with only a fleeting glance from the engineer.

I n pu t Meter Selection Switch and LED

: Selecting this mode via the switch allows the user to monitor

the incoming signal on the logarithmic (upper) scale of the VU meter. When in input mode, the LED
above the switch will light in a green color, indicating that input mode is selected.

Ou tput Meter Selection Switch and LED

: Selecting this mode via the switch allows the user to monitor

the outgoing signal on the logarithmic (upper) scale of the VU meter. When in output mode, the LED
above the switch will light in a yellow color, indicating that output mode is selected.

Ga in Reduction Meter Selection Switch and LED

: Selecting this mode via the switch allows the user

to monitor the amount of gain reduction in dB, applied to the signal on the linear (lower) scale of the
VU meter. When in gain reduction mode, the LED above the switch will light in a red color, indicating
that gain reduction mode is selected. In gain reduction mode the meter displays the amount of gain
reduction resulting from the settings of both the compressor and PeakStopPlus limiter.

Ste reo Couple Switch and LED

: This switch activates the stereo linkage between channels one and

two. When the switch is in the IN position, the two channels of the 160SL are linked together, and the
oversized yellow LED directly above the switch lights to indicate the selection. In stereo mode channel
one (the left side of the 160SL) is the “master” and channel two (the right side of the 160SL) is the
“slave”. When the two channels are linked together, the controls on the master side control the settings
of both channels of the 160SL. The controls on the slave side are disabled, although the meter moves
synchronous to the meter on the master side. In stereo mode, the 160SL uses a process called True RMS
Power Summing

™

. True RMS Power Summing combines the RMS signal energy (power) of the audio

signal of both channels and allows the 160SL to operate based on the signal information from both the
right an left channels of audio signal.

Po wer LED

: The Power LED is located directly above the Stereo Couple switch, at the center point of

the 160SL. It is a custom designed oversized, blue LED, in keeping with the dbx Blue Series concept
of innovative engineering, and revolutionary design. It remains lit while the 160SL is connected to an
appropriate power supply, and the Power switch is in the ON position.

160SL

lue

series

160SL

controls

160SL

notes

160SL

Operations

160SL

Operations

Inspection

Operating

Connection

Installation

Technical

Introduction

to your system

considerations

contents

concept

diagram

applications

support and factory service

160SL

Specifications

160SL

Manual

Design

Block

Controls

Advanced

Warranty

lue

series

Advertising

Popular Brands

Popular manuals