dbx PMC16 - Manual (Page 45)

PMC 16 Owner’s Manual 39
Using Multi-Select
The PMC16’s operation was designed to provide an efficient workflow. There is a feature
which was designed to allow the user to perform tasks on multiple channels as quickly
as possible. This feature is referred to as “Multi-Select”. Multi-Select is used during Live
Mode operation and allows for quick selection of multiple channels and/or groups for
multi-channel muting, soloing, or editing of channel levels, pans, or effect send levels.
To use Multi-Select:
1. Press and hold the <CHANNEL SELECT> button for the first channel or group
you would like to select.
2. With the first selected channel’s <CHANNEL SELECT> button still held down,
press and release the <CHANNEL SELECT> button for each additional channel
or group you would like to add to the multi-selection then release the
<CHANNEL SELECT> button which you have been holding.
3. Press the button for the desired function to edit (i.e. <LEvELS>, <MUTE>,
<PAN>, etc.).
4. Turn the <DATA> encoder to adjust the parameters for the selected channels/
groups respectively.
5. Press any <CHANNEL SELECT> button to dissolve the multi-selection.
Note:
Relative values are retained unless a channel’s level, pan, or effect send level is
pushed beyond the maximum allowed value or below the minimum allowed value.