dbx PMC16 - Manual (Page 47)

PMC 16 Owner’s Manual 41
Adjusting Channel Levels
The Levels page allows you to adjust each channel’s level.
To adjust a channel’s Level:
1. Press the <LEvEL> button. You should now be in the Level Edit page,
indicated by the LEVEL button LED lighting.
2. Select the channel(s) and/or group(s) which you would like to edit, using the
<CHANNEL SELECT> button(s) (the LED on the top of the selected Channel
Select button(s) will light green, indicating your selection).
3. Turn the <DATA> encoder to adjust the levels of all selected channels.
4. Repeat steps 2-3 to adjust the level(s) of any other channel(s).
ActivAtiNg groups:
To enable the Group function and adjust the levels of all
channels within a group respectively, press the <GROUP> button then perform the above
steps.