Dowco Power Sports Guardian Snowmobile Cover Universal Fit - Manual

Thank you for purchasing a DOWCO, Inc. Universal
Snowmobile cover. We are pleased that you have selected
one of the many fine quality products that we produce for
recreational vehicles.
Your snowmobile cover has been designed and manufac-
tured of the highest quality materials available for this recre-
ational application. We utilize a superior weave, longer last-
ing 10 oz. breathable canvas. The use of quick-release
buckles and indestructible shock cord around the bottom
makes your cover completely secure and trailerable.
Another unique feature is the tie down system with added
straps located at the top of the cover, which minimizes the
amount of air trapped under the cover while trailering.
As is the case with all fabric products, care should be taken
to keep sharp objects, hot items or solvents from coming
in contact with the material
Contents
1 ea. snowmobile cover 1 ea. instruction sheet
2 ea. long straps w/hook 4 ea. short straps w/hook
Installation
1. Position the cover over the handlebar area with the front
of the cover facing the hood of the snowmobile. The
cover has a tag sewn in the front of the cover.
2. Pull the cover down over the handlebars.
3. At the front of the snowmobile, pull cover over the nose
area.
4. At the rear of the snowmobile, pull cover completely
over the seat and rear bumper.
5. Assemble straps with hooks to buckles (see figure #1).
The four short straps are attached to buckles located at
the bottom of the cover. The two long straps are
attached to the buckles located on the top of the cover.
Make sure all straps are secured tightly. If any portion of
the cover is left loose while trailering, damage may
occur and the longevity of the cover will decrease. The
hooks will attach easily to the track suspension. Do not
overtighten straps. To release the straps, gently lift up
on the lip of the buckle and disconnect hook.
6. There is an additional web loop located at the nose. You
may find it necessary to secure this area so the front is
tighter. To do this you may tie a piece of rope from one
ski to the other, running the rope through the loop.
Care & Cleaning
To clean cover, soak area that is dirty and gently scrub with
a medium stiff brush, then rinse. Allow cover to air dry. Do
Not machine dry.
Soap, heat, salt and prolonged exposure to the sun will
damage the cover by causing a breakdown of dyes and
also reduce the protective coating used to give it water and
mildew resistance.
For summer storage, wash cover thoroughly inside and out
to remove dirt and road salt. Air dry, then place cover back
on snowmobile. Do Not store cover and snowmobile in
direct sunlight.
Limited Warranty
DOWCO, Inc. warrants it’s covers (on a pro-rated basis) to be
free from defects in material and workmanship for two years
from date of original purchase.
This warranty does not cover damage caused by misuse, neg-
lect, accident, or improper installation, allowing the item to come
in contact with petroleum products, battery acid, chemicals or
tree sap, not properly securing it, or allowing sharp objects to
damage it.
All incidental and/or consequential damages are excluded from
this warranty. Implied warranties are limited to the life of this
warranty. Some states do not allow limitations on how long an
implied warranty lasts or the exclusion of incidental or conse-
quential damages, so the above exclusions or limitations may
not apply to you. This warranty gives you specific legal rights.
You may also have other legal rights which may vary from state
to state.
Please call DOWCO, Inc. at (800) 558-7755 for a Return
Materials Authorization (RMA) number and send to:
DOWCO, Inc.
4230 Clipper Drive
Manitowoc, WI 54220
All returns MUST be returned prepaid to DOWCO, Inc.
within 15 days of RMA issue. COD or collect shipments will
not be accepted. Proof of purchase must accompany item.
UNAUTHORIZED RETURNS WILL NOT BE ACCEPTED.
DOWCO, Inc.
4230 Clipper Drive Manitowoc, WI 54220
Phone (800) 558-7755
Fax (920) 682-5891
email [email protected]
website www.dowco-inc.com
Form #14565-00
Revised 05/19/05
tighten
Shock Cord
Hook
Pull to Fig. 1 Attached
to cover