3B Scientific Optical Precision Bench D, 500 mm - Manual

3
Instruction sheet
3B SCIENTIFIC® PHYSICS
U10300 Optical bench, triangular profile, 1 m
U10301 Optical bench, triangular profile, 2 m
U10302 Optical bench, triangular profile, 0.5 m
U10304 Set of supports for the optical bench
U10305 Swivel joint
6/03 ALF
®
The optical bench and its accessories are used in ex-
periments with optical components for research and
demonstrations where the highest degree of precision
is required for adjustment of axes and distance mea-
surement. The swivel joint permits experiment con-
figurations where the beam path is deflected.
1. Description, technical data
1.1 Optical benches
Abb. 1: 1 Rail 2 Scale
3 Groove for mounting 4 Drill hole for attaching the
the rail feet swivel joint
5 Groove for the tightening of the optical rider
The optical bench made of triangular-profile, black
anodised aluminium is tilt-proof, deformation- and
torsion-proof as well as anti-slip. A continuous scale in
cm/mm division is attached to both sides. Two grooves
on the supporting surface are available for optional
mounting on two rail supports or one support and a
single-point support. There are three drill holes at the
front end for fastening the end plate or the swivel joint.
U10300 1 m Weight: approx. 3.5 kg
U10301 2 m Weight: approx. 7 kg
U10302 0.5 m Weight: approx. 1.75 kg
1.2 Set of supports for the optical bench
This set consists of two rail supports and a single-point
support made of black anodised aluminium. It allows
for height adjustment of the optical bench in a four-
point or three-point support configuration.
Length of the supports: 270 mm
1
2
3
4
5