English, Français, Description – Braun EC1 Satin Hair 7 User Manual

Page 3: Getting started, Iontec, Styling, After use, Cleaning, Mise en marche

Advertising
background image

3

Im Garantiefall senden Sie das Gerät mit Kaufbeleg bitte an
einen autorisierten Braun Kundendienstpartner. Die Anschrift
finden Sie unter www.service.braun.com oder können Sie
kostenlos unter 00800/27 28 64 63 erfragen.

English

Please read these use instructions carefully before use and keep
them for future reference.

Important
• Plug your appliance into an alternating current (~) outlet only

and make sure that your household voltage corresponds to the
voltage printed on the appliance.

This appliance must never be used near water (e.g. a

filled wash basin, bathtub or shower). Do not allow the
appliance to get wet. Always unplug it after use.

• For additional protection, it is advisable to install a residual

current device (RCD) with a rated residual operating current
not exceeding 30 mA in the electrical circuit of your bathroom.
Ask your installer for advice.

• This appliance is not intended for use by children or persons

with reduced physical, sensory or mental capabilities, unless
they are given supervision by a person responsible for their
safety. In general, we recommend that you keep the appliance
out of reach of children. Children should be supervised to
ensure that they do not play with the appliance.

• Be careful to avoid that the hot surfaces of the appliance get

into direct contact with the skin, in particular of the ears, face
or neck.

• When hot, do not place on surfaces that are not heat-resistant.
• Do not wrap the mains cord around the appliance. Regularly

check the mains cord for wear of damage. If the cord is
damaged, stop using the appliance.

• If the complete display flashes, this indicates an internal error

of the appliance. In this case, take the appliance to a Braun
Service Centre for checking. Unqualified repair work can lead
to extreme hazards for the user.

• The appliance should be used on dry hair only.

Description

1 Cool

tip

2 Tong with clamp
3 Green ion jet
4 Tong

opener

5 LC

Display

6 Temperature selector (– / +)
7 «satin ions» button
8 On/off

button

9 Swivel

cord

Getting started

• Connect the appliance to an electrical outlet and push the on/

off button [8] for 1 second to turn it on.

• During heat-up, the display shows three flashing segments

(Fig. A).

• After approximately 45 seconds, the minimum styling tempera-

ture is reached and you can start using the appliance.

• Using the temperature selector [6], you can adjust the styling

temperature. There are 5 temperature levels represented by
ascending segments on the display. When changing the tem-
perature, the segments will flash. The segments shine perma-
nently when the selected temperature is reached.

• We recommend the following temperature settings:
1 segment (min): for fine hair (Fig. B)
2 to 4 segments: for normal hair
5 segments (max): for thick hair and professional use (Fig. C)
The higher the temperature, the better the curling result will be.

However, for better care of chemically treated hair, the tem-
perature setting should be 3 segments maximum.

IONTEC

IONTEC is a technology which is specifically developed to
protect the health of your hair. It restores the moisture balance of
your hair that usually gets lost during styling with excessive heat.
By activating the «satin ions» button [7] for one second, the
green ion jet [3] releases millions of ions effectively on to your
hair. These satin ions envelop every single hair and quickly
restore the moisture balance of your hair by attracting moisture
particles from the air while curling.

Styling

Preparing for use
• Make sure your hair is completely dry before using the

appliance.

• Comb your hair with a wide-toothed comb to remove tangles.
• Section your hair off. Starting at the hair tips, clamp a section

of hair (strand of 3-4 cm max.) with the tong.

Creating curls and waves
• Gently wind the strand up to the roots. Allow the strand to

remain curled up for a couple of seconds before unwinding it.
For best results, slightly press the tong opener [4] in order to
smoothly release the strand. For better handling, you may hold
the cool tip [1] with your other hand.

• You can even straighten a strand that already has been curled

by clamping the strand at the roots again and then letting the
appliance glide slowly and carefully along the strand towards
the hair tips.

• For safety reasons, the appliance will automatically turn off

after approximately 30 minutes.

• Simply press the on/off button [8] again in case you may want

to continue using the appliance.

After use

• After each use, switch off the appliance by pushing the on/off

button [8] for one second.

• Keep in mind that the heating barrel is still hot. Do not touch it

to avoid any risk of burns. After 20 minutes cooling time, you
will be able to touch the heating barrel without any risk.

• During use and cooling down, the appliance always has to be

placed on a heat-resistant surface.

Cleaning

• Always unplug before cleaning. Never immerse the appliance

in water.

• Clean the appliance with a damp cloth and use a soft cloth to

dry.

Subject to change without notice.

Please do not dispose of the product in the household
waste at the end of its useful life. Disposal can take place
at a Braun Service Centre or at appropriate collection
points provided in your country.

Guarantee
We grant a 2 year guarantee on the product commencing on the
date of purchase. Within the guarantee period we will eliminate
any defects in the appliance resulting from faults in materials or
workmanship, free of charge either by repairing or replacing the
complete appliance at our discretion.
This guarantee extends to every country where this appliance is
supplied by Braun or its appointed distributor.

This guarantee does not cover: damage due to improper use,
normal wear or use as well as defects that have a negligible
effect on the value or operation of the appliance. The guarantee
becomes void if repairs are undertaken by unauthorised persons
and if original Braun parts are not used.

To obtain service within the guarantee period, hand in or send
the complete appliance with your sales receipt to an authorised
Braun Customer Service Centre (address information available
online at www.service.braun.com).

For UK only:
This guarantee in no way affects your rights under statutory law.

Français

Avant la première utilisation de cet appareil, prenez le temps de
lire le mode d’emploi complètement et attentivement et con-
servez-le.

Important
• Brancher l’appareil uniquement sur courant alternatif (~) et

s‘assurer que la tension délivrée correspond bien à celle
indiquée sur l’appareil.

Cet appareil ne doit jamais être utilisé à proximité d’eau

(un lavabo rempli d’eau, une baignoire ou une douche
par exemple). Ne pas mouiller l‘appareil. Après utilisa-
tion, débrancher l’appareil.

• Pour une protection supplémentaire, il est conseillé de faire

installer un disjoncteur différentiel n‘excédant pas 30 mA de
courant de fuite maximum admis dans le circuit d‘alimentation
de la salle de bains. Demander conseil à son installateur.

• Cet appareil n’est pas destiné à des enfants ou à des

personnes aux capacités mentales, sensorielles et physiques
réduites à moins qu’elles ne soient sous la surveillance d’un
adulte responsable de leur sécurité. Il convient de surveiller
les enfants pour s’assurer qu’ils ne jouent pas avec l’appareil.
Conserver hors de portée des enfants.

• Prenez garde à ne pas mettre en contact direct les surfaces

chaudes de l’appareil avec la peau, en particulier les oreilles, le
visage ou le cou.

• Ne pas enrouler le cordon autour de l’appareil. Vérifiez réguliè-

rement que le cordon n’est pas endommagé. S’il présente des
dommages, ne plus utiliser l’appareil.

• Si l’écran complet clignote, cela indique un dysfonctionnement

interne de l’appareil. Dans ce cas, faites vérifier votre appareil
par un centre service agréé Braun. Une intervention par un
réparateur non qualifié peut entrainer de graves dangers pour
l’utilisateur.

• Cet appareil s’utilise uniquement sur cheveux secs.

Description

1 Embout

froid

2 Cylindre diffuseur et pince
3 Diffuseur d’ions négatifs
4 Bouton pour ouvrir la pince
5 Ecran

LCD

6 Réglage de la température (–/+)
7 Bouton « satin ions »
8 Interrupteur

marche/arrêt

9 Cordon

rotatif

Mise en marche

• Connecter l’appareil à une prise électrique et presser le bouton

marche/arrêt [8] pendant 1 seconde pour le mettre en marche.

• Pendant que l’appareil chauffe, l’écran affiche 3 barres cligno-

tantes (Fig. A.)

• Au bout d’environ 45 secondes la température de coiffage

minimale est atteinte et vous pouvez commencer à vous
coiffer.

• Vous pouvez régler la température de coiffage grâce au bouton

[6]. Les 5 niveaux de température disponibles sont représentés
à l’écran par des barres de taille croissante. Lorsque vous
modifiez le réglage de la température, les barres clignotent,
jusqu’à ce que la température soit atteinte : les barres sont
affichées alors de manière continue.

• Nous recommandons les réglages de température suivants :
1 barre (min) :

cheveux fins (Fig. B)

2 à 4 barres :

cheveux normaux

5 barres (max) : cheveux épais et usage professionnel (Fig. C)
Plus la température est élevée, meilleur sera le résultat des

boucles.
En revanche pour les cheveux ayant subit des traitements
chimiques, ne dépassez pas le niveau 3 de température.

IONTEC

La technologie IONTEC a été spécialement développée pour
protéger la santé de vos cheveux. Elle rétablit le taux
d’hydratation de vos cheveux qui diminue généralement lorsque
vous vous séchez les cheveux à une température trop élevée.
En actionnant le bouton « satin ions » [7] pendant une seconde,

92166237_CU720-710-EC.indd 3

92166237_CU720-710-EC.indd 3

22.03.12 13:18

22.03.12 13:18

Advertising
This manual is related to the following products: