Neutrik NPPA-TT-E56 User Manual
Page 9
Page 9 of 12
NPPA-TT-E56 Instruction Manual
6. Cable retention to the unit
The ELCO®-EDAC® 56 connector is fixed to the housing by means of 4 screws. The plug itself
is secured by one screw.
The built in cable retention bar is at the back of the casing. Simply attach the cables with cable
ties to the bar as shown in the photo.
Cable Retention Bar
7. Channel identification
The front panel is equipped with channel identification strips located in the center of the
channels and marked with the channel numbers 1-24 and 25-48 respectively.
Channel identification strips
Labeling strips
For the perfect management of the system and for individual identification according to
customer’s needs there are two large and separate labeling strips, one for the bottom and one
for the top row.