Neutrik NPPA-TT-E90 PATCH PANEL - Manual (Page 10)

Page 10 of 14
NPPA-TT-E90 Instruction Manual
6. Cable retention to the unit
The ELCO®-EDAC® 90 connector is fixed to the housing by means of 4 screws. The plug itself
is secured by one screw.
The built in cable retention bar is at the back of the casing. Simply attach the cables with cable
ties to the bar as shown in the photo.
Cable Retention Bar
7. Channel identification
The front panel is equipped with channel identification strips located in the center of the
channels and marked with the channel numbers 1-24 and 25-48 respectively.