Neutrik MPOS-PC1 - Manual (Page 19)

137 www.neutrik.com
A s s e m b l y T o o l s T e c h n i c a l D a t a
Specification nanoCON miniCON neutriCON
Series Series Series
E l e c t r i c a l
M e c h a n i c a l
M a t e r i a l
Housing cable connector CuSn4Pb4Zn4 ZnAl4Cu1 / CuZn39Pb3 ZnAl4Cu1
gal Ni or black chrome
Housing receptacle CuZn39Pb2 ZnAl4Cu1 ZnAl4Cu1,
gal Ni or black chrome
Insert PETP PA 6.6 PBTP 15% GR
Contacts CuZn35Pb2 CuZn35Pb2 (solder) CuZn35Pb2 (solder)
CuZn39Pb3 (crimp) CuZn39Pb3 (crimp)
CuSn6
Contact surface 0.5 µm Au 0.2 µm AuCo 0.3 µm Au hard
alloy over 2 µm Ni
Chuck POM   
E n v i r o n m e n t a l
Flammability UL 94 HB - - 
Flammability UL 94 V-0   -
Temperature range -30 °C to +80 °C   
Protection class (mated) IP 40* IP 5X IP 5X
Safety Requirements EN/IC61984 - - -
*: Receptacle
FASTON
® is a trademark of AMP Inc.
Number of contacts 3 12 (1-12 modular system) 8 (1-8 modular system)
Rated current per contact 2 A 3 A 7.5 A (solder) , 5 A (crimp)
Rated voltage 50 V ac 50 V ac 50 V ac
Dielectric strength 1000 V dc 1000 V dc 1500 Vdc
Contact resistance ≤ 12 mΩ ≤ 8 mΩ ≤ 5 mΩ
Insulation resistance after damp heat test (IEC 68-2-30) > 1 G Ω > 500 M Ω > 500 M Ω
Retention method latch Push-pull Push-pull
Cable O.D. range 3.4 mm max. 3 – 5 mm (grey chuck) 3 – 7 mm
5 – 7 mm (white chuck) 3 – 3.8 mm (SR8A)
2.5 – 6 mm 6 – 7 mm (SR8B)
(crimp version MSRC)
Wiring 0.2 mm 2 / 24 AWG 0.5 mm 2 / 20 AWG 1.0 mm 2 / 18 AWG
for solid wire for solder for solder
0.14 mm 2 0.22 mm 2 0.14 - 0.34 mm 2
26 AWG 24 AWG 22 - 26 AWG
for stranded wire for crimp for crimp
Solderability complies with IEC 68-2-20   