StreetGlow Neon Motorcycle Plate Frame User Manual
Motorcycle neon license plate instructions, Auto-neon, Accessories
Advertising
The Original
Auto-Neon
®
Accessories
INSTALLATION
INSTRUCTIONS
1- Disconnect battery before wiring.
2- Do not over tighten or frame will crack.
3- Mount license plate on front of neon
frame and bolt in place using enclosed rub-
ber washers and lock nuts. Use rubber
washers in front of license plate and in back
of neon frame before securing lock nut.
4- Splice and connect red wire (+) to brake
light or alternative light source depending
on which activation you prefer. Connect
black wire (-) to ground.
5- Reconnect the battery.
Should you desire a 4 hole mount, you may
drill through the neon frame using your
icense plate as a template.
MOTORCYCLE NEON
LICENSE PLATE
INSTRUCTIONS
MOTORCYCLE NEON
LICENSE PLATE
INSTRUCTIONS
Advertising