Dexter Laundry T-300 (On-Premise) - Manual

EMPLOYEE OWNED
MADE IN THE U.S.A. • SINCE 1894
** Agency approvals may vary depending on configuration. Consult factory for details. For the most accurate information, please consult machine installation guide for
all design and construction purposes. Due to continuous product improvements, design and specifications subject to change.
SCVD60HMS-_ _
Dimensions / Capacity
Dry Weight Capacity
20 lb (9.0 kg)
Cabinet Height 43.9” (111.4 cm)
Cabinet Width 26” (66.0 cm)
Overall Depth 25.0” (63.5 cm)
Door Opening 12.25” (31.1cm)
Cylinder Diameter 21.0” (53.3 cm)
Cylinder Depth 13.5” (34.3 cm)
Cylinder Volume 2.7 cu.ft. (76.7 l)
Floor to Door Bottom 15.0” (38.1 cm)
Speeds G-Force (RPM)
High Speed Extract
100 G (579 RPM)
Intermed. Extract Speed 60 G (449 RPM)
Washing Speed .9 G (55 RPM)
Motor Size 1 HP (.75 KW)
Net Weight - lb (kg) 309 lbs (140.2 kg)
Shipping Dimensions:
Shipping Weight
337 lbs (152.9 kg)
Height - in (cm) 50.0” (53.5 cm)
Width - in (cm) 27.25” (69.2 cm)
Depth - in (cm)
30.5” (77.4 cm)
Water
Water inlet Size
3/4” (19mm)
Flow Rate (per min) 9 gal (34.1 L)
Pressure (min/max) 30-120 psi (207-827 Kpa)
Drain Diameter (O.D.) 2.25” (5.7 cm)
Floor to Center of Drain 6” (15.2 cm)
Electrical / Circuit Breaker / Running Amps / Wire Size
-10 (120/60/1)
20 amp / 13 amp / provided
-12 (208-240/60/1 - 2 wire + ground) 15 amp / 4 amp / #12
-12 (208-240/60/3 - 3 wire + ground) 15 amp / 4 amp / #12
-59 (230/50/1 - 2 wire + ground) 15 amp / 4 amp / 3.5 mm2
Installation Recommendations
Clearance Between Machines
1/2” (min) (1.3 cm)
Clearance Behind Machines 24” (min) (61.0 cm)
Concrete Thickness 6” (min) (15.2 cm)
Approvals**
Rev. 32 - 6/10/2013
Dexter OPL T-300 Washer Specifications Industrial 80lb Reversing
Front
Side Back
Part #0995-109-024