Factory Direct Hardware Hansgrohe 04301 Talis S - Manual (Page 6)

6
English
Installation
Position the tap, escutcheon, and sealing ring on
the mounting surface.
Tighten the mounting nut.
Wrap the threads on the ¼" adapter with 4 - 
layers of Teflon tape.
Install the adapter in the pipe tap.
Close the faucet supply stops.
Disconnect the cold supply hose from the stop.
The Zuvo™ filter is for cold
water only. Do not install the
pipe tap on the hot supply
stop.
Install the pipe tap on the stop.
Install the supply hose on the pipe tap.