Factory Direct Hardware Delta 9158-DST Fuse - Manual

2 13/32"
(61 mm)
KITCHEN FAUCETS
■ Fuse™ Pull-Down Collection
■ Single Handle Deck Mount
■ Single or 3 Hole Sink Applications
■ Diamond™ Seal Technology
■ Integrated Supply Tubes
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Centermount or 8" (203 mm) centers with optional 10"
(254 mm) escutcheon.
• 16" (406 mm) high, 9" (229 mm) long, spout
swings 360˚.
• Lever handle. Control mechanism is the diamond embedded
ceramic disc cartridge.
• Control shall return to neutral position when faucet is
turned off.
• Touch-Clean® 2 function (stream/spray) sprayhead.
• Quick connect hoses.
• Pull-down wand operates in an aerated or spray mode via an
ergonomic toggle diverter.
• Red/blue graphics on handle button to indicate hot/cold
temperature.
• Magnetic docking system secures sprayer to spout.
• Integral double check valves in sprayer assembly.
• Integral hose lead to aid installation.
• Mounting wrench to assist in tightening mounting nut securely.
• Hose travels inside mounting shank so it will not interfere
with deck edges.
• Keyed 10" (254 mm) escutcheon to help alignment and
aid installation.
• 3/8" O.D. straight, staggered PEX supply tubes, 33 1/2"
(851 mm) and 35" (889 mm).
0
.75
1.50
2.25
3.00
3.75
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
4.50
0 69 138 207 276 345 414 483 552 621
0
2.8
5.7
8.5
11.4
14.2
17.0
Pressure (kPa)
Flow (Liters Per Minute)
9158▲-DST
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.specselect.com for finish options and product availability.
DSP-K-9158-DST Rev. A
WARRANTy
• Lifetime Faucet and Finish Limited Warranty to the
original consumer purchaser to be free from defects
in material and workmanship.
• 5 Year Limited Warranty for usage in all industrial,
commercial and business applications.
9158▲-DST with
optional escutcheon
9"
(229 mm)
16"
(406 mm)
9"
(229 mm)
2 1/2"
(64 mm)
Max.
9 1/2"
(241 mm)
16 1/2"
(419 mm)
5 1/2"
(140 mm)
3 1/2"
(89 mm)
1 3/4"
(45 mm)
8"
(203 mm)
35"
(889 mm)
33 1/2"
(851 mm)
3/8"
Compression
Fittings
▲ Designate proper finish suffix
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2011 Masco Corporation of Indiana
®
®
U P
C
COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
•
ASME A112.18.6
Indicates compliance to
ICC/ANSI A117.1
•
Verified compliant with .25% weighted average Pb
content regulations.
8"
(203 mm)
Centers
10"
(254 mm)
3x 1 5/16" -
1 1/2"
(33-38 mm)
Hole Size
Recommended Min. 2 1/2" (64 mm)
Clearance to Back Splash
2x 1 5/16" -
1 1/2"
(33-38 mm)
Hole Size