Factory Direct Hardware Delta 27C4842-HDS - Manual

Sink Faucet Deckmount
4" deck LESS pop-up - CER-TECK® ceramic
structures
Model No: 27C4842
SPECIFICATION:
• HEAVY DUTY CAST BRASS sink faucet
• 102mm (4") centers, two handle
• Polished chrome plated finish
• Metal hold-down package
• Spout#: 8 - Gooseneck spout-4.5" radius - 10.5" height (unmounted) -
Standard rigid/swivel field installation unless LS Limited swing option
selected-Vandal resistant .090" wall thickness(R2)
• Outlet#: 4 - Standard 1.5 USGPM (5.7 L/Min) Flow Control Aerator
• Handle#: 2 - 102 mm (4") Hooded Blade Handles-ADA compliant-Metal-
Color indexed-Vandal resistant screws
COMPLIES WITH:
• CSA certified.
• Complies to ASME Standard A112.18.1.
• Verified to <0.25% Pb average wetted surface regulations
• (Contact Delta Representative for State and/or Local Approvals)
• 102 mm (4") Hooded Blade Handle ADA compliant and meets Handicapped
Accessibility Standard ASME A117.1 of less than 5 lbs operating force.
(Dimensional drawing on following page)
• Not Available
OPERATION:
NOTES:
Verified to <0.25% Pb average wetted surface regulations
CA/VT Compliance:
This COMPLETE SERIES is ONLY available as CA/VT Compliant product
as of Nov. 1, 2009.
The Product Numbers have NOT changed.
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced February 27, 2012.
- 1.0.19275
Page of 1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030