Factory Direct Hardware Hansgrohe 39851 Axor Citterio - Manual (Page 2)


Technical Information
Recommended water pressure 15 - 75 PSI
Max. water pressure 145 PSI
Recommended hot water temp. 10° - 140° F*
Max. hot water temp 176°F*
Flow rate 1.5 GPM
Hole size in mounting surface 1½"
Max. depth of mounting surface ¾"
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
English
Installation Considerations
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
•
•
•
39850xx1
39851xx1