PolyPlanar IXM-10 XM - Manual (Page 4)

1352 Charwood Road, Suite D, Hanover, MD 21076 Tel (410) 761-4000 Fax (410) 761-6274
www.polyplanar.com
4
Connection to the MZ Series Amplifier:
1. Using the extension cable, connect the RD-44 Control Panel to
the MZ-100 amplifier Control Panel input.
2.
Connect the “Control Panel/Amplifier” plug to the MZ amplifier
“Audio System” plug.
3.
Connect the plug marked “XM Direct Box Control” to the input on
the XM Direct Receiver.
4.
Connect the RCA cables marked “XM Direct Box Audio” to the
XM Direct Receiver RCA inputs.
5. Plug in the XM antenna and route for best signal.
[1]
[2]
[3]
[4]
[5]