PolyPlanar IXM-10 XM - Manual (Page 8)

1352 Charwood Road, Suite D, Hanover, MD 21076 Tel (410) 761-4000 Fax (410) 761-6274
www.polyplanar.com
8
Category Mode
Mounting:
The IXM-10 can be mounted using the included double-stick tape (make sure
to mount to a clean, dry surface), or it can screwed in place using the included
screws and case mounting tabs. The XMD-1000 should be fixed firmly to a
clean, dry surface away from any water or excess humidity.
Make sure any unused connectors have their caps firmly attached.
Trouble shooting:
1. Only receiving channel 1: XM is a subscription service. Make
sure your subscription is up to date and follow the activation
instructions for your XM unit.
2.
Display reads “No Antenna”: Make sure the XM antenna is
plugged in.
3.
Display reads “No Signal”: Adjust placement of antenna for
maximum signal strength.
4.
Display reads “No XM”: Check connection to XMD-1000.
5. Poor reception or drop-outs: Adjust placement of antenna for
maximum signal strength.
6. No Audio: Make sure the RCA cables are routed properly as
shown in the hook-up diagrams on pages 2-5.
7. Will not turn on: Verify cable connections and insure 12V power
and ground are connected.
Specifications:
Operating Voltage ………………….. ……… 13.8V (10V – 16V) DC
Dimensions (app
rox. w/h/d) ……………….. 105mm X 40mm X 120mm
4.15 X 1.5 X 4.75 inches
Weight ……………………………………….. 15 oz (.425 Kg)
WARRANTY
Poly-Planar marine audio systems are warranted to be free of defects in materials and
workmanship for a period of two years. Warranty is subject to proper installation and
operation within published specifications. Poly-Planar will repair or replace, at its