Braun 3390 Silk-épil SoftPerfection - Manual (Page 12)

12
The SoftLift™ tips will make sure
that even flat lying hair is lifted and
removed thoroughly at the root.
As hair can grow in different direc-
tions, it may also be helpful to guide
the appliance in different directions
to achieve optimum results.
Both rollers of the 4-way moving pain
softener should always be kept in
contact with the skin, allowing the
pulsating movements to stimulate
and relax the skin for a gentler
epilation.
3 Leg epilation
Epilate your legs from the lower
leg in an upward direction. When
epilating behind the knee, keep the
leg stretched out straight.
4 Underarm and bikini line epilation
Please be aware that especially
at the beginning these areas are
particularly sensitive to pain. With
repeated usage the pain sensation
will diminish.
For more comfort, ensure that the
hair is at the optimum length of
2-5 mm.
Before epilating, thoroughly clean the
respective area to remove residue
(like deodorant). Then carefully dab
dry with a towel. When epilating the
underarm, keep your arm raised up
so that the skin is stretched and
guide the appliance in different
directions.
As skin may be more sensitive
directly after epilation, avoid using
irritating substances such as deo-
dorants with alcohol.
Cleaning the epilation head
5 After epilating, unplug the appliance
and clean the epilation head:
First take off the 4-way moving pain
softener
1 and brush out the rollers.
6 To clean the tweezer element, use
the cleaning brush dipped into
alcohol. Turn the product around and
clean the tweezers with the brush
while turning the barrel manually.
7 Remove the epilation head by pres-
sing the release buttons 3 on the left
and right and pull it off.
Give the top of the housing a quick
clean with the brush. Place the
epilation head and the 4-way moving
pain softener back on the housing.
B Shaving
1. Remove the OptiTrim attach-
ment. Put on the shaver head 8 by
clicking it in (the long hair trimmer
should be in front).
2. When using the shaver head, always
slide the switch up to setting «2».
3. For best results, guide the shaving
system in a way that about half of
the shaving foil and the long hair
trimmer are in contact with your
skin. Always guide the appliance in
the direction of the trimmer. The
trimmer first raises all long hairs and
cuts them off. Then the flexible foil
follows to smooth away any stubble.
Pre-cutting hair for epilation
4. If you choose to pre-cut your hair to
the ideal length for epilation, place
the OptiTrim attachment onto the
shaver head.
5. Hold the appliance with the OptiTrim
attachment ensuring that the
surface of the comb is lying flat on
the skin. Guide the appliance with
8a
5319423_S6-92 Seite 12 Freitag, 14. November 2003 12:10 12