Ocean Optics PlasCalc - Manual (Page 6)

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology 3
4 Installation
4.1 Installation
Do not connect the system to the PC before PlasCalc Software has been installed.
Insert the PlasCalc CD in your CD drive and launch the setup program. The setup
program will lead you through the installation process. Please follow the instructions
and fill in the necessary information.
All program files and the Java Runtime Engine will be copied on the hard disk of
your computer. Please make sure that enough free disk space (approx. 100 MByte)
is available.
4.2 Software Update
Disconnect the PlasCalc-2000 system from the PC before updating the software.
Once the system is disconnected install the new version like first time installation.
4.3 Removing PlasCalc
For a complete removal of PlasCalc from your computer please activate the icon
Software in the System Panel of Windows, select PlasCalc in the lower list box and
then press the button Add/Remove. All program files of PlasCalc will be removed
completely from your computer.
4.4 System Requirements
IBM compatible PC with Pentium processor or equivalent and CD drive
Operating system Windows 2000/XP/WIN7 (32bit)
Required free hard disk space:
approx. 100 MByte