Ocean Optics Breakout Box - Manual (Page 4)

HR4-BREAKOUT Installation and Operation Instructions
Accessing the Connectors on the Circuit Board
To access the connectors on the circuit board inside the breakout box, remove the four screws on the
bottom of the breakout box using a Phillips-head screwdriver.
Breakout Box (Bottom View)
Breakout Box Specifications
30-Pin Connector Pinout Information
When facing the 30-pin connector on the front of the Breakout Box, pin numbering is as follows:
29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
30 28 26 24 22 20 18 16 14 12 10 8 6 4 2
Power LED
30-Pin Connector Pinout Diagram
4 212-00000-000-01-1108