Ocean Optics Breakout Box - Manual (Page 8)

HR4-BREAKOUT Installation and Operation Instructions
J5 Connector Pinouts
Use the J5 connector for internal breakout for custom circuitry.
Pin # Description Pin # Description
J5-1 Tx J5-9 VUSB
J5-2 Rx J5-10 GND_SIGNAL
J5-3 SCL J5-11 A_OUT
J5-4 SDA J5-12 A_IN
J5-5 MOSI J5-13 No Connection
J5-6 MISO J5-14 No Connection
J5-7 SPI_CLK J5-15 No Connection
J5-8 SPICS_OUT J5-16 No Connection
J6 Connector Pinouts
Use the J6 connector for internal breakout for custom circuitry.
Pin # Description Pin # Description
J6-1 GPIO-0 J6-9 GPIO-8
J6-2 GPIO-1 J6-10 GPIO-9
J6-3 GPIO-2 J6-11 VUSB
J6-4 GPIO-3 J6-12 GND_SIGNAL
J6-5 GPIO-4 J6-13 Single_strobe
J6-6 GPIO-5 J6-14 ContStrobe
J6-7 GPIO-6 J6-15 LampEnable
J6-8 GPIO-7 J6-16 ExtTrigIn
J7 Connector Pinouts
Use the J7 connector for analog input/output connection.
Pin # Description
J7-1 VUSB
J7-2 ExtTrigIn
J7-3 GND_SIGNAL
J7-4 A_OUT
J7-5 GND_SIGNAL
J7-6 A_IN
8 212-00000-000-01-1108