Ocean Optics OOIIrrad-C - Manual (Page 36)

4: Configuration
► Procedure
1. Select your spectrometer type from the Spectrometer Type drop-down list.
2. Select the appropriate A/D converter type for your spectrometer from the A/D Converter Type
drop-down list.
Note
When using a non-USB A/D converter, you must set additional parameters on this screen
to properly configure your A/D converter. Consult the documentation for your A/D
converter hardware for specific instructions.
3. Configure the appropriate information based on your spectrometer and A/D converter type
(options that appear after you make the A/D Converter Type selection) and click the OK button.
4. Select the USB serial number from the USB Serial Number drop-down list.
Configuring Spectrometer Parameters
Select Configure | Spectrometer from the menu bar or type CTRL + F7 to configure the spectrometer
for your sampling system in OOIIrrad-C. The Configure Spectrometer screen appears.
30 000-20000-070-0905