Ocean Optics QE Pro Install - Manual (Page 18)

2: Installing the QE-PRO
12 891-00000-000-02-201401
3. Select the data buffering capacity (the total number of scans the device can store at once).
4. Click Clear Buffer to set the buffer to zero and start over.
Connect Spectroscopic Accessories
To find operating instructions for QE Pro compatible products (such as light sources, sampling chambers,
and probes), consult the Software and Technical Resources CD or the Ocean Optics website at
http://www.oceanoptics.com/technical/operatinginstructions.asp.
External Triggering Options
You can trigger the QE Pro using a variety of External Triggering options through the 30-pin Accessory
Connector on the spectrometer. See the External Triggering Options document located at
http://www.oceanoptics.com/technical/External-Triggering2.pdf . The triggering document contains
instructions for configuring External Triggering options for the QE Pro.