Ocean Optics ElliCalc - Manual (Page 39)

Ocean Optics Germany GmbH Thin Film Metrology
38
7.4 Main menu “Options”
7.4.1 Change buttons
In this window you can make visible or invisible:
- The startup image:
The picture will disappear after some seconds or you might “click it away”
- measure and analyze-button:
to combine the functions to the measure and the analyze button
- show fit checkboxes (in internal mode of ElliCalc only):
in the menu Edit Structure there are some fit checkboxes that can be made visible or not. In the
current software version only thickness and n and k (for Cauchy models) are activated
- show fit sliders (in internal mode of ElliCalc only):
you may use fit sliders to check for variations of thickness, n or k
- show dark button:
to measure any dark current separately
- show SCOUT recipe button:
it is not necessary to see the SCOUT window, but for experienced users this might be helpful
with SCOUT witout SCOUT = internal mode