Ocean Optics ElliCalc - Manual (Page 43)

Ocean Optics Germany GmbH Thin Film Metrology
42
7.5 Main menu “Version”
This menu is visible only if you own a “combiversion” = a combined version of NanoCalc and ElliCalc. You
may switch to the other application
7.6 Chart and chartdesigner
If you produced a 1D-
plot or 2Dplot or 3D-plot
you may change nearly
ALL parameters of the
plot by clicking with the
RIGHT mouse button
Hint:
To change the view
position: keep CTRL
button pressed and
move the mouse at the
same time.
For further information
see VCFI5.hlp in the
help directory of your ElliCalc installation.
1D-plot 2D-plot 3D-plot
During mapping it is possible to produce 1D-plots, 2D-plots and 3D-plots.
These plot types can be changed interactively after the mapping was finished. Click on the plot with right
mouse button to get access to the "chart designer“.