Manual operation, Remote operation, To turn laser on – Ocean Optics Multimode Spectrum User Manual

Page 14: To turn laser off, To adjust power

Advertising
background image

2: Set-up and Operation

Manual Operation

To turn laser on: Flip the external laser toggle switch mounted on the module to the ON (I) position.

To turn laser off: Flip the external laser toggle switch mounted on the module to the Off (I) position.

Remote Operation

To Turn Laser ON

►

Procedure

1. Toggle external laser enable switch mounted on side wall of module to the ON (I) position.

2. Apply power (5 V DC) to Pin 6.

3. Break connection to ground on Pin 7

To Turn Laser Off

►

Procedure

4. Tie Pin 7 (Enable ) to Ground.

5. Turn off 5 V power supply to Pin 6.

To Adjust Power

This allows you to smoothly adjust the laser's output power levels from 0 to max power by applying the
appropriate voltage bias onto Pin 8.

►

Procedure

1. Ground Pin 2.

2. Apply a 0 - 1 V DC voltage bias onto Pin 8.

6

LASER-785-IP -01-1208

Advertising