SENA ProBee-ZU10 User Manual
Page 40
40
ProBee-ZU10 User Guide Rev.1.5
5.2.4
ATE
Description
Echo(1) or No Echo(0).
Execute
ATE<number><CR>
Response
OK<CR>
5.2.5
ATM
Description
Enter the multicast mode. If there’s no argument after the command, it will connect to
the preconfigured destination group ID(AT+DESTGROUPID). Every data is packetized
at intervals of inter character timeout(S12).
Execute
ATM<CR>
ATM<groupID><CR>
Response
OK<CR>
5.2.6
ATO
Description
Return to data mode.
Execute
ATO<CR>
Response
5.2.7
ATR
Description
Response(1) or No Response(0).
Execute
ATR<number><CR>
Response
OK<CR>
5.2.8
ATS
Description
Get/Set the S-registers.
Execute
ATS<CR>
ATS<number>?<CR>
ATS<number>=<value><CR>
Response
List of the S-register and
description
<value><CR>
OK<CR>
OK<CR> or ERROR<CR>
5.2.9
ATZ
Description
Reset the node.
Execute
ATZ<CR>
Response
OK<CR>
5.2.10 AT&F
Description
Factory reset.
Execute
AT&F<CR>
Response
OK<CR>