SENA Parani10 User Manual
Page 41
41
D<cr><lf>
<cr><lf>OK<cr><lf>
5)
ATD112233445566<cr>
<cr><lf>OK<cr><lf>
<cr><lf>CONNECT
<cr><lf> or
<cr><lf>ERROR<cr
><lf>
Connect to the specified device.
If you want to enable Authentication
and Encryption, just set variable as 1.
6)
ATD<cr>
<cr><lf>OK<cr><lf>
<cr><lf>CONNECT
<cr><lf> or
<cr><lf>ERROR<cr
><lf>
Connect
to
the device
that
last
successfully connected.
7)
AT+BTSCAN<cr>
<cr><lf>OK<cr><lf>
Enable inquiry and page scans with
timeout of infinity.
8)
AT+BTSCAN,n,to<cr>
<cr><lf>OK<cr><lf>
Enable inquiry or Page scans.
If n=1, disable page and enable
inquiry.
If n=2, enable page and disable
inquiry.
If n=3, enable both page and inquiry.
Scan will be performed during <to>
seconds.
9)
AT+BTSCAN112233445566,to<cr>
<cr><lf>OK<cr><lf>
Will scan of only specified device.
10)
AT+BTCANCEL<cr>
<cr><lf>OK<cr><lf>
cancel the current pending operation
when the device is inquiring, paging
or scanning mode.
11)
+++
<cr><lf>OK<cr><lf>
Drop from online mode to command
mode.
12)
ATO<cr>
<cr><lf>OK<cr><lf>
Return to online mode if currently
being connected.
13)
ATH<cr>
<cr><lf>OK<cr><lf>
Drop the connection.
14)
AT+BTSEC,Authentication,Encryption
<cr>
<cr><lf>OK<cr><lf>
Same as AT+BTAUTH