SENA NEMO10-SK - Manual (Page 6)

6
1.2 Package Check List
 NEMO10
NEMO10 DIL module
 NEMO10-SK
- NEMO10 DIL module
- Carrier board for the NEMO10
- 110V or 230V Power supply adapter
- Ethernet CAT5 cable
- Serial console/data cable
1.3 NEMO10 Product Specification
Processor
80C51 8-bit microprocessor
Hardware
Memory
32KB SRAM, 64KB EEPROM
Built-in UART
Serial speeds 1200bps to 115.2kbps
Flow Control: None, Hardware RTS/CTS Serial Interface
Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND
10 Base-T Ethernet interface
Network Interfaces
Supports static and dynamic IP address
Protocols ARP, IP/ICMP, TCP, Telnet, DHCP client, PPPoE
Security User ID & Password
Telnet or serial console port or HelloDevice Manager
Management
Full-featured system status display
External interface 24-pin external interface
Serial interface
Ethernet interface
LED interface
Switch interface
Power supply interface
Others
Supply voltage
5VDC +/- 10%
Power
Supply current
60mA @ 5VDC
Environmental Operating temperature: 0 ~ 50
o
C
Storage temperature: -20 ~ 66
o
C
Humidity : 90% (Non-condensing)
Physical
properties Dimension
45 mm L (1.8 in.) * 45 mm W (1.8 in.) * 18.5 mm H (0.7 in.)
Warranty 1-year limited warranty