Billet Specialties Premium Tru Trac Serpentine System - Small Block Ford - Manual (Page 10)

www.billetspecialties.com www.billetspecialties.com
19
Figure 14: Install A/C Compressor
Place the A/C compressor onto the timing cover with the ports facing upward.
Thread the compressor shoulder bolt with 1/2” flat washer through the lower
compressor boss and in to the timing cover and finger tighten.
INSTALLATION TIP: Slide the shoulder bolt all the way into the compressor boss
when threading the bolt in.
Allow the compressor to slowly swing down and rest.
Figure 13: Install Tensioner
Thread the 5/16”-18 x 1” socket set screw into the back of the tensioner and
finger tighten. (A)
Thread the 2.129” hour glass shaped spacer nut onto the set screw and
tighten firmly. (B)
Place tensioner and spacer nut onto timing cover, locate bottom tensioner hole
and slide over short spacer nut shaft. (C)
Thread a 5/16”-18 x 1” socket head cap screw through back of timing cover into
spacer nut and tighten firmly.
(A)
(B)
(C)